No results were found for the filter!
With cutting ring Solderless tube union acc. to DIN EN ISO 8434-1 and DIN 2353 For tube diameters of 6 mm to 15 mm Available versions see the following chart: Item no. Tube Ø d Ø d1 408-406 6 8 410-406 6 10 443-706-121 6 12 443-706-151 6...
With EO2 functional nut Solderless tube union with cutting ring and union nut Acc. to DIN EN ISO 8434-1 and DIN 2353 For tube diameter of 6 to 10 mm Available versions: Item no. Tube Ø d d1 473-806-351 6 M14x1,5 473-806-391 6 M20x1,5...
acc. to DIN 3862 Pressure: max. 45 bar Sealing via flat washer acc. to DIN 7603
Delivery rates: 0.1 L/min 0.2 L/min 0.5 L/min suitable as a replacement for M series gear pumps with corresponding delivery rates
SKF pump retaining plate Suitable for lubrication systems with gear pump units KFU and piston pumps PEF
For oils Operating viscosity: 20 - 1000 mm²/s Counter pressure max.: at 1,3 l/min.: 5 bar at 2,6 l/min: 3 bar Speed range: 50 - 1500 rpm Suction height: max. 1000 mm Outer diameter of suction and pressure lines: at 1,3 l/min: 8 mm at 2,6...
SKF rotary vane pump unit FLM12 and FLM24 For installation seperate from the oil reservoir Single-circuit flange unit with moulded valve chambers Electrically driven Suitable for: SKF MonoFlex single-line central lubrication systems and...
Filter Filter mesh Material filter insert Check valve Mesh size Screen surface Flow rate Operating pressure max. Connections 213-870 63 µ wire mesh - 0,063 mm 21 cm² 2 l/min 60 bar G 1/4 213870F ¹ 160 µ wire mesh - 0,160 mm 20 cm² - 60...
With short threaded end For tube Ø from 6 mm to 10 mm Thread: M10x1 to M16x1,5 In combination with union nut and cutting ring For solderless tube connection Item no. Tube Ø d d1 d2 l 406-323 6 M10x1 tap M10x1 - 408-313 8 M14x1,5 M14x1,5...
Function: Sectional metering device MC²-HP Outlets: 6 - 16 Lubricants: oil or grease NLGI class 0 to 2, mineral or synthetic lubricants Metering quantity per stroke and outlet: 0,098 cm³ - 0,787 cm³ Operating pressure: max. 510 bar...
Lubricant: mineral oils, mineral-based greases, environmentally friendly and synthetic oils and greases Operating viscosity: > 12mm²/s Cone penetration: ≥ 265 x 0,1 mm (up to NLGI-class2) Operating pressure: max. 200 bar (oil), 300 bar...
Lubricant: mineral oils, mineral-bases greases, environmentally friendly and synthetic oils and greases Operating viscosity: > 12mm²/s Cone penetration: ≥ 265 x 0,1 mm (up to NLGI-class 2) Operating pressure: max. 200 bar (oil), 300 bar...
Lubricant: mineral oils, mineral-based greases, environmentally friendly and synthetic oils and greases Operating viscosity: > 12mm²/s Cone penettration: ≥ 265 x 0,1 mm (up to NLGI-class2) Operating pressure: max. 200 bar (oil), 300 bar...
Lubricant: mineral oils, mineral-based greases, environmentally friendly and synthetic oils and greases Operating viscosity: > 12mm²/s Cone penetration: ≥ 265 x 0,1 mm (up to NLGI-class 2) Operating pressure: max. 200 bar (oil), 300 bar...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Lubricant: oil Operating viscosity: 20 - 1000 m²/s Standard motor DM7: 230 / 380 V, 50 / 60 Hz Rated speed: 2700 rpm Counter pressure: max. 28 bar Suction height for open pressure line: 500 mm Suction connection: M14x1,5 Pressure...
Products from SKF
![SKF](https://www.vogel-zentralschmierung.de/media/image/f7/ea/dd/SKF564dc82eaa137_200x200.jpg)
As the world's leading technology manufacturer, the Swedish company Svenska Kullagerfabriken (abbreviated: SKF) is best known for its product portfolio in the areas of bearings, seals and lubrication technology. The group has a broad dealer network with more than 15,000 branches and employs more than 48,500 people worldwide. In 2004, Willy Vogel AG, a specialist in central lubrication systems, was taken over by SKF and incorporated into the company.
Viewed