No results were found for the filter!
Control Unit 85307 85307
Function: control unit Operating temperature: -15 to +50 °C Supply voltage: 10 V DC to 30 V DC Operating current: 150 mA max. (no load); 70 mA nominal value Output: 7 A RMS max Lamp output: 3 A max Switching: semiconductor short-circuit...
Coupling for gear pumps series M M2.28
Plastic coupling for gear pump units Replacement coupling suitable for all SKF / Vogel gear pumps of the M series e.g. MFE5-2000, MF5-2000, M5-2000
Cross Fitting 96-2106-0058
Solderless tube union with cutting ring and union acc. to DIN EN ISO 8434-1 and DIN 2353 For tube diameters of 6 to 22 mm Available versions see the following chart: Item no. Tube Ø d 96-2106-0058 6 446-308-001 8 446-310-001 10...
Crosspiece DAK504-S1
acc. to DIN 3862 Pressure: max. 45 bar Material: Aluminium, galvanised steel Item no. Tube Ø d1 a b h l1 l2 Material DAK504-S1 4 / 6 M10x1 / M8x1 22 20 40 40 20 Aluminium DAK506 6 M10x1 22 20 40 40 20 DAK508 8 M14x1,5 32 20 50 50 25...
Distributor Disc VPG-K-2T-PS
Metering device versions: VPG, VPKG, VPM and VPKM For disc sizes from 05T/S to 6T/S
Double Nipple 406-103
acc. to DIN 3862 Pressure: max. 45 bar Material: galvanised steel Material item no. 406-233: brass Die Verschraubung 406-233 wird häufig als Verbindungsstück für Einleitungsverteiler verwendet. Item no. d1 d2 d3 l l1 l2 SW Material...
Elbow Connector 96-6202-0058
Elbow/angled, 90° Tube fitting, solderless with cutting ring and union nut acc. to DIN EN ISO 8434-1 and DIN 2353 Material: galvanised steel Designs: LL, L and S More versions and materials are available on inquiry. Item no. Tube Ø d d1...
Elbow Fitting with Tube Pin DY958
For installation in grooves acc. to DIN 3854/DIN 3862 Tube pin for tube fittings Material: brass Available sizes acc. to the following chart: Item no. Tube Ø d1 d2 d3 d4 l1 l2 l3 Material DY958 6 6 M10x1 8 14 30,8 21 22 brass DY960 8 8...
Elbow Fittings 45° and 90 ° 406-145K
acc. to DIN 3862 Material: galvanised steel for pressure up to max. 45 bar 45° angle or 90° angle Item no. d d1 l1 l2 406-145K M8x1 tap M10x1 7,5 21 406-045K M10x1 tap M10x1 7,5 21 406-089K M8x1 tap M10x1 11 24 406-090K M10x1 tap M10x1...
Elbow-Bulkhead Fitting 406-409
For tube diameters of 6 to 22 mm acc. to DIN EN ISO 8434-1 and DIN 2353 Solderless tube union With cutting ring and union nut For connection of lubrication lines For thicknesses of max. 16 mm Available versions see the following chart:...
Electric Overpressure Indicator PPU-UES PPU-UES
SKF electric overpressure indicator PPU-UES Rated voltage: 230 V Rated switching capacity: 230 V / 25 mA - 24 V / 2 A Contact: 1 CO Type of enclosure (DIN 40050): IP 67 Type of connection: soldered Temperature range: -5 to +80 °C
Filter Elements 169-400-260-V57
SKF filter elements Nominal sizes: NG 40, NG 63, NG 100 Filter fineness: 3 μm, 10 μm, 20 μm, 25 μm, 50 μm More filter elements (e.g. stainless steel) on request.
Filter Housing 853-880-010
SKF filter housing Nominal sizes: NG 40, NG 63, NG 100 Reverse flow valve: without or 2x More filter housings (e.g. with bypass) upon request.
Filter Unit for CLU4 24-0651-3772
Filter unit for CLU4 Optional electrical dirt indicator Operating pressure: 0,3 - 10 bar Operating temperature: +5 to +80 °C Capacity: 12 Liter Measuring range: 0 to 5,5 Liter Filter fineness: 40 µm, wire mesh Flange connection: inlet...
Flexible Connection Set 995-340-000
Flexible connection set from SKF Connection of metering devices and manifolds of same or different size For oil and fluid grease Fas and easy installation Position infinitely variable Detachable any number of times Leakage-free Consits...
Flow limiter SMB M SMB-M
Single flow with position monitoring - SMB MX 21/22/31 Function: 2-way flow control valve with a fixed flow rate Monitoring: Signal generator (SMB MX 21/22) or piston detector (yes-no statement; SMB MX 31) Installation position: Any...
Flow Monitors 171-100-011
Flow monitor Application Flow rate Specifications 171-100-011 Intermittent consumption lubrication systems Operating viscosity: 20 - 750 mm²/s Maßbild 1 0,2 - 1,5 cm³/stroke Clock rate: max. 2 / min Operating pressure: min. 4 bar / max....
Flow Restrictor SMD 2 24-2581-2656
Flow restrictor SMD 2 for SKF CircOil oil circulation lubrication systems Nominal volume flow per flow restrictor: 0.1 - 8 l/min Pressure: max. 16 bar Operating viscosity: 50 - 650 mm²/s Operating temperature: 0 to 70 °C CE conformity mark
Flow Sensors GS300
Measurement principle: calorimetric Metering quantities: 0,01 to 0,6 cm³ / impulse Frequency: max. 4 impulses / min Medium: Oil, viscosity: 10 to 2000 mm²/s Operating pressure: max. 40 bar Operating temperature: +10 °C to +50 °C...
Gear Pump Unit KFU2-40 KFU2-40 912
Motor: 12 V, DC Flow rate: 140 cm³/min Container: 2.7 L plastic NLGI class: 000 / 00 Flow media: fluid grease Operating temperature: -25 to +75 °C Operating pressure: max. 38 bar Control unit: without Protection class: IP 59 k
Gear Pump Unit KFU6-20 KFU6-20 912
Motor: 12 V, DC Flow rate: 140 cm³/min Container: 6 L plastic NLGI class: 000 / 00 Flow media: fluid grease Operating temperature: -25 to +75 °C Operating pressure: max. 38 bar Control unit: without Protection class: IP 59 k
Gear Pump Unit KFUS2-64 KFUS2-64+924
Container capacity: 2.7 l Weight (without lubricant): approx. 5.5 kg Operating voltage: 24 V DC Fuse 24 V: 8 A Flow rate: 140 cm³/min (at counter pressure p = 38 bar and temperature t = 25 °C) Connection value for single-line systems:...
Gear Pump ZM ZM
Function: Electrically driven gear pump unit Lubricant: Oil Permissible operating viscosity: 20 to 2000 mm²/s Number of outlets: 1, 2, 5, 8, 10, 20 Flow rate: 1.2; 2.5 l/min Back pressure: 30; 20 bar
Products from SKF
As the world's leading technology manufacturer, the Swedish company Svenska Kullagerfabriken (abbreviated: SKF) is best known for its product portfolio in the areas of bearings, seals and lubrication technology. The group has a broad dealer network with more than 15,000 branches and employs more than 48,500 people worldwide. In 2004, Willy Vogel AG, a specialist in central lubrication systems, was taken over by SKF and incorporated into the company.
Viewed