No results were found for the filter!
Gerotor Pumps 143 Coupling, complete Coupling (complete) for Gerotor gear pumps series 143 Design: curved tooth coupling Materials: steel hub, polyamide sleeve Maintenance-free continuous operation Almost wear-free operation It is recommended to always replace coupling...
Gerotor Pumps 143 Flange Design: Motor flange design (IMB14) Terminal box position: on the suction connection side of the pump Flow rate range: 0.85 to 50 l/min Maximum pressure: 50 bar Flow medium: Lubricating and hydraulic oils Operating viscosity: 20 to 1000...
Gerotor Pumps 143 Foot Specifications: Design: motor foot design (IMB34) Medium: mineral and synthetic lubrication ois, hydraulic oils Viscosity: 20 - 1000 mm²/s max. counter pressure: 20 - 50 bar Suction height: max. 1000 mm Ambient temperature: 0 to +40°C...
Gerotor Pumps 143 with motor Design: Foot version IM B34, flange version IM B14 Protection class: IP55 Temperature class: 155 (F) used according to B Operating mode: S1 Temperature range: -20 to +40 °C Max. installation altitude: 1000 m above sea level Cooling type:...
Gerotor Pumps 143 without motor Construction: Gear ring pump+pump flange+shaft coupling (without motor) Gear ring pump only (without motor) Flow rate range: 0.85 to 50 l/min Maximum pressure: 50 bar Flow medium: Lubricating and hydraulic oils Operating viscosity: 20 to...
Grease Fill Pump GTP SKF electric grease filling pump GTP For pumping lubricants from separate grease containers Design: gear ring pump Temperature range: -10 to +50 °C Installation position: vertical Pump drive: electric motor with starting capacitor and...
Grease Fill Pump GTP with pump mount Filling pump mounted on pump frame with follower plate in transport bucket Container capacity: 25 kg Plug-in coupling + transport bracket: with or without Empty signal: yes Design: gear ring pump Temperature range: -10 to +50 °C...
Grease Fill Pump GTP-C with pump mount Filling pump mounted on pump frame with follower plate in transport bucket Container content: 25; 50; 180 kg Plug-in coupling + transport handle: standard, optionally without Empty signal: yes Design: gear ring pump Temperature range:...
Grease Reservoir BF1.5 SKF grease reservoirBF1.5 Compressed air for following piston: max. 10 bar Lubricant: grease up to NLGI grade 2 Reservoir capacity: 1,5 kg Mounting position: any Connection Fittings for M14x1,5: socket union 408-202, double tapered...
Injection Oiler 3-port type Lubricant: oil Viscosity: 10 to 1100 mm²/s Metering quantity: 3 - 30 mm³/stroke Compressed air actuation: 3 to 10 bar Flow rate at 6 bar: max. 200 l/min Ambient temperature: -20 to +80 °C Control: individual or group control Sealing: NBR...
Injection Oiler with Reservoir Lubricant: Oil Viscosity: 10 to 1100 mm²/s Metering quantity: 3 - 30 mm³/stroke Compressed air actuation: 3 to 10 bar Flow rate at 6 bar: max. 200 l/min Ambient temperature: –20 to +80 °C Single-application (linkable with other oilers)...
KFA Piston Pump with control Lubricants: greases, NLGI 000 to 2 With integrated control unit IG502-1 Outlets: 1 - 2 Flow rate: acc. to pump element Reservoir: 1,0 liter clear plastic Operating pressure: max. 300 bar Operating temperatur: -25 to +70°C Selectable...
KFA Piston Pump without control Lubricants: greases, NLGI 000 to 2 Without control Outlets: 1 - 3 Flow rate: acc. to pump element Reservoir: 1,0 liter clear plastic Operating pressure: max. 300 bar Operating temperatur: -25 to +70°C Selectable options: Voltage: 12 volt...
KFG Piston Pump with control Lubricants: greases, NLGI 000 to 2 With control unit IG502-2-1 Outlets: 1 - 3 Flow rate: acc. to pump element Reservoir material: clear plastic Operating pressure: max. 300 bar Operating temperatur: -25 to +70°C Selectable options:...
KFG Piston Pump without control Lubricants: greases, NLGI 000 to 2 Outlets: 1 - 3 Flow rate: acc. to pump element Reservoir material: clear plastic Operating pressure: max. 300 bar Operating temperatur: -25 to+ 70°C Selectable options: Voltage: 12 volt 24 volt 230 volt...
L-Connector Adjustable With cutting ring Solderless tube union acc. to DIN EN ISO 8434-1 and DIN 2353 Designs L and S Available versions see the following chart: Item no. Tube Ø d d1 Design 443-406-061 6 M12x1,5 L 443-408-081 8 M14x1,5 443-410-101...
Level Switch for Fluid Grease Liquid level switch for fluid grease Replacement part for fluid grease pump units series MKF Reservoir sizes:: 2,0 / 3,0 or 6,0 liter Function: NC (line break detection)
Level Switch WS32 Liquid level switch WS32 Switching points: 1 Function: minimum fill level Contact: CO Connection: rectangular plug with line socket, DIN EN 175301-803-A Installation: vertical Switching element: protective gas contact Protection class...
Level Switch WS33 Liquid level switch WS 33 Lubricant: Fluids with a maximum effective viscosity of 1500 mm²/s Number of switching points: 2 for min. and max. fill level Plug: device plug or circular plug Installation: vertical Operating temperature: -10...
Level Switch WS35 Liquid level switch WS35 Switching points: 2 Mounting position: vertical Switching element: reed contact Protection class DIN EN 60529: IP 65 Operating temperature: -10 to +80 °C Lubricants*: mineral and synthetic oils; viscosity max...
Lubricant Reservoir for MKU, MKF and MFE Spare reservoir for single-line pumps For pump series: MKU, MKF andMFE Reservoir sizes: 1,8 / 2,0 liter, 3,0 liter and 6,0 liter Reservoir material: clear plastic
Lubricator HS04 Hydraulically operated piston pump lubricator from SKF for hammers and breakers Standard kit HS04G0F/0001 incl. 1 cartridge, 1 welding plate, 2 scews M16x85 and 2 clamp sleeves Cartridge: 0,4 kg Lubricant: grease NLGI grade 2 Metering...
Manifolds Material: Al-alloy Connections: 1 - 24 Inlet and outlet thread acc. to version: M8x1 M10x1 M14x1,5 Pressure: max. 45 bar Dimensions see data sheet and chart Suitable for all dosing units as well as single-digit piston and single-digit...
Manifolds for series 391 Connections for dosing elements: 1 to 6 Connection threas with slot for flat seal ring: M14x1,5 Material: aluminium Main line connection: G 1/8, G 1/4, M10x1 or M14x1,5
Products from SKF
As the world's leading technology manufacturer, the Swedish company Svenska Kullagerfabriken (abbreviated: SKF) is best known for its product portfolio in the areas of bearings, seals and lubrication technology. The group has a broad dealer network with more than 15,000 branches and employs more than 48,500 people worldwide. In 2004, Willy Vogel AG, a specialist in central lubrication systems, was taken over by SKF and incorporated into the company.
Viewed